Configure Hive Migrator

Properties are defined in the following files:

/etc/wandisco/hivemigrator/application.properties

/etc/wandisco/hivemigrator/log4j2.yaml

/etc/wandisco/hivemigrator/vars.sh

After adding new properties or changing existing values, always restart the Hive Migrator service.

note

Data Migrator 1.19 Hive Migrator configuration changes

Hive Migrator configuration is now stored in /etc/wandisco/hivemigrator/application.properties.

The following configuration files have been removed:

• /etc/wandisco/hivemigrator/application.yaml
• /etc/wandisco/hivemigrator/hive-migrator.yaml

This update is automatically applied when upgrading from earlier product versions. There's no need to make any manual changes.

Application properties

General configuration

These configuration properties are used to adjust general items of operation.

Name	Details
micronaut.server.port	The non-TLS port to access Hive Migrator Default value: 6780 Allowed values: Integer value of available port
micronaut.server.dualProtocol	Whether Hive Migrator should allow both non-TLS connections on the non-TLS port and allow TLS connections on the TLS port Default value: true Allowed values: true,false
micronaut.server.host	Hive Migrator server host Default value: 127.0.0.1 Allowed values: Hive Migrator IP address
hivemigrator.migrationWorkerThreads	The number of migration worker threads Default value: Integer value of number of available cores Allowed values: An integer value
hivemigrator.migrationBatchSize	The maximum number of objects to migrate at the same time Default value: 1000 Allowed values: An integer value
hivemigrator.connectionRetryTimeout	The connection retry timeout in minutes Default value: 20 Allowed values: An integer value
hivemigrator.delayBetweenScanRounds	The delay between scans in seconds Default value: 1 Allowed values: An integer value
hivemigrator.hikariConfig.maximumPoolSize	The maximum Hikari pool size Default value: Integer value of twice the number of available cores Allowed values: An integer value
hivemigrator.hikariConfig.connectionTimeout	The timeout in milliseconds for the Hikari pool Default value: 30000 Allowed values: An integer value
hivemigrator.delayBetweenErrorNotifications	The delay in minutes between non fatal error notifications a migration can report to the UI and CLI. Error information remains recorded in Hivemigrator logs. Default value: 5 Allowed values: An integer value

Migration batch size

Use the following parameter to limit the number of objects that are sent in a single request to a target metastore:

Batch size parameter:

hivemigrator.migrationBatchSize=1000

The default is 1000. To change the parameter:

1. Open /etc/wandisco/hivemigrator/application.properties in a text editor.
2. Add the line hivemigrator.migrationBatchSize=<integer>, where <integer> is the maximum number of objects for each request.
3. Save the change.
4. Restart the Hive Migrator service. See System service commands - Hive Migrator

info

AWS Glue Data Catalog allows a maximum of 100 objects for each request.
Set hivemigrator.migrationBatchSize to 100 if you have AWS Glue as your target.

State

Hive Migrator uses an internally-managed database to store migrations and migration status information.

Name	Details
hivemigrator.storagePath	The Hive Migrator internal database location Default value: /opt/wandisco/hivemigrator/hivemigrator.db Allowed values: Any valid file path

Backup configuration

Name	Details
hivemigrator.backups.location	The default location to store backup files Default value: /opt/wandisco/hivemigrator/backups Allowed values: A valid path
hivemigrator.backups.namePrefix	The prefix for backup filenames Default value: hvmbackup Allowed values: Any filename string
hivemigrator.backups.listMaxSize	The maximum number of backups to be returned by the /backups endpoint Default value: 1000 Allowed values: Positive integer

Security

Secure access to the Hive Migrator REST API through configuration. Select no security or HTTP basic security. To configure secure access, see Configure basic auth.

Name	Details
micronaut.security.enabled	Enable or disable basic authentication Default value: false Allowed values: true,false
hivemigrator.username	The Hive Migrator API basic authentication username Default value: (none) Allowed values: Any string that defines a username (no whitespace)
hivemigrator.password	The Hive Migrator API basic authentication password Default value: (none) Allowed values: bcrypt generated password, encrypted using a bcrypt generator that provides a "2a" prefix at the beginning of the encrypted password
hivemigrator.integration.liveDataMigrator.username	The basic authentication username for Data Migrator Default value: (none) Allowed values: The Data Migrator basic authentication username
hivemigrator.integration.liveDataMigrator.password	The basic authentication password for Data Migrator Default value: (none) Allowed values: The Data Migrator basic authentication password encrypted with the encryptor tool

Connect to Data Migrator and Hive Migrator with basic authentication

To use basic authentication for Data Migrator and Hive Migrator, follow the steps in Configure basic auth.

Connect to Hive Migrator with basic authentication

Follow these steps if you used different credentials for Data Migrator and Hive Migrator, or if basic authentication isn't enabled on Data Migrator.

This step isn't required if you use the same credentials for both services.

When basic authentication is enabled, enter the username and password when prompted to connect to Hive Migrator with the CLI:

Example

connect hivemigrator localhost: trying to connect...
Username: admin
Password: ***********
Connected to hivemigrator v1.<VERSION-NUMBER> on http://localhost:6780.

The username and password are required for direct access to the Hive Migrator REST API.

info

If you enable basic authentication on Hive Migrator, ensure you update the UI with the credentials to maintain functionality.

Transport Layer Security

When you deploy a remote agent, Hive Migrator automatically generates certificates and establishes a transport layer security (TLS) connection to the agent. You can configure TLS for the Hive Migrator API, for integration with Data Migrator, and for any remote metastore agents.

TLS for Hive Migrator API

info

Due to a limitation of the Micronaut framework, your key specified for the Hive Migrator API must be the first or only key contained within the keystore. Provide a keystore containing either the first or only key you require for the Hive Migrator API.

To configure TLS for Hive Migrator to encrypt Hive Migrator's API, use the following properties in /etc/wandisco/hivemigrator/application.properties:

Name	Details
micronaut.ssl.enabled	Whether Hive Migrator should use TLS on its own API Default value: true Allowed values: true,false
micronaut.ssl.buildSelfSigned	Whether Hive Migrator should generate self-signed certificates. We recommend setting to false when using a custom truststore and keystore Default value: true Allowed values: true, false
micronaut.ssl.port	The port to access the Hive Migrator API on TLS Default value: 6781 Allowed values: Integer value of available port
micronaut.ssl.key-store.path	The path to the keystore for Hive Migrator prefixed with "file:", for example: file:/etc/keystore/keystore.jks. Default value: (none) Allowed values: Any valid path to a keystore file with prefix: "file:".
micronaut.ssl.key-store.password	The keystore password Default value: (none) Allowed values: A valid password string
micronaut.ssl.key-store.type	The keystore file type Default value: (none) Allowed values: PKCS12,JKS
micronaut.ssl.key.alias	The alias of the certificate in the keystore that Hive Migrator will supply to clients Default value: (none) Allowed values: A valid alias string

TLS for remote agents

When you deploy a remote agent (for example, Azure SQL or AWS Glue), Hive Migrator establishes a Transport Layer Security (TLS) connection to the agent.

Certificates and keys are automatically generated for this connection for both Hive Migrator and the remote agent. These are placed in the following directories:

Hive Migrator - Client and Root CA certificates

/etc/wandisco/hivemigrator/client-key.pem
/etc/wandisco/hivemigrator/client-cert.pem
/etc/wandisco/hivemigrator/ca-cert.pem
/etc/wandisco/hivemigrator/ca-key.pem
/etc/wandisco/hivemigrator/ca-cert.srl

Remote agent - Server and Root CA certificates

/etc/wandisco/hivemigrator-remote-server/server-key.pem
/etc/wandisco/hivemigrator-remote-server/server-cert.pem
/etc/wandisco/hivemigrator-remote-server/ca-cert.pem

You can apply existing certificates for remote agents, upload existing certificates, or generate new certificates with the Hive Migrator REST API

To update UI with details for TLS, remove the product instance and then add it again with the updated TLS connection details.

Apply existing certificates for remote agents

Use the following steps to apply existing certificates for remote agents:

1. Generate self-signed certificates, assigning Hive Migrator as the client and the Hive Migrator remote agent as the server.
   Use the following file names:

   ca-cert.pem,
   client-cert.pem,
   client-key.pem,
   server-cert.pem,
   server-key.pem

2. Copy the following files to the Hive Migrator directory /etc/wandisco/hivemigrator/:

   • ca-cert.pem
   • client-cert.pem
   • client-key.pem

3. Copy the following files to the Hive Migrator remote server directory /etc/wandisco/hivemigrator-remote-server:

   • ca-cert.pem
   • server-cert.pem
   • server-key.pem

4. Restart the service for the Hive Migrator remote server by running the command:

   service hivemigrator-remote-server restart

Upload existing certificates

info

Ensure the correct certificates and keys are uploaded for Hive Migrator and all remote agents that are connected.

Existing connections will break if the trust relationship isn't established between Hive Migrator and remote agents.

Upload certificates and keys by using the following Hive Migrator REST API endpoints:

Hive Migrator

POST ​/config​/certificates​/upload

Remote agent

POST ​/agents/{name}/certificates/upload

The remote agent service restarts automatically when new certificates are uploaded this way. The Hive Migrator service doesn't require a restart to start using new certificates.

Generate new certificates with the Hive Migrator REST API

info

Generate new certificates for Hive Migrator and all remote agents that are connected.

Generating certificates for just one of these components breaks existing connections.

Generate new certificates and keys by using the following Hive Migrator REST API endpoints:

Hive Migrator

POST ​/config​/certificates​/generate

Remote agent

POST ​/agents/{name}/certificates/generate

The remote agent service automatically restarts when you generate new certificates this way. You don't need to restart the Hive Migrator service to use the new certificates.

Configure TLS for integration with Data Migrator

Name	Details
hivemigrator.integration.liveDataMigrator.useSsl	Whether Hive Migrator should use TLS for Data Migrator Default value: false Allowed values: true,false
hivemigrator.integration.liveDataMigrator.trust-store.path	Which truststore should be used to determine whether Hive Migrator will trust the certificate obtained from Data Migrator Default value: /etc/wandisco/hivemigrator/tls/keystore.p12 Allowed values: A valid path to truststore
hivemigrator.integration.liveDataMigrator.trust-store.password	The password for the truststore defined in the above trust-store.path parameter Default value: (none) Allowed values: Truststore password string
hivemigrator.integration.liveDataMigrator.trust-store.type	The file type of the truststore defined in the above trust-store.path parameter Default value: (none) Allowed values: PKCS12, JKS
hivemigrator.integration.liveDataMigrator.host	The Data Migrator host Default value: localhost Allowed values: The valid Data Migrator hostname or IP
hivemigrator.integration.liveDataMigrator.port	The Data Migrator port Default value: 18080 Allowed values: The valid Data Migrator port
hivemigrator.integration.liveDataMigrator.connectionMaxRetries	The number of retries for Data Migrator connection Default value: 5 Allowed values: An integer value
hivemigrator.integration.liveDataMigrator.connectionRetryDelay	The delay in milliseconds between Data Migrator retries Default value: 5000 Allowed values: An integer value

Talkback

Change the following properties to alter how the talkback API outputs data:

Name	Details
talkback.apidata.enabled	Enables an hourly process to log Hive Migrator configuration from the output of REST endpoints. Default value: true
talkback.apidata.backupsCount	Specifies the maximum number of backups that the talkback process gets from the REST endpoint. Default value: 50

Location mapping

Use locationmapping application properties to specify additional table location properties Hivemigrator maps to the target location during migration. By default, no additional location mapping is applied.

Uncomment the existing properties and supply comma-separated table property name values to adjust the default location mapping.

For example, to map the location value of a SerDe location property of 'path', add the table property as a value for hivemigrator.locationmapping.keys.serde and restart the Hivemigrator service for the change to take effect.

caution

Mapping applies to all tables with the specified property name values regardless of the property being a valid source location or otherwise.

Any source value, with a mapping applied to the property, will be mapped to the target filesystem replacing the first value after two forward slashes("//"). For example, a source value of todo://our_placeholder/data/ equates to a target value of <target_filesystem>/data.

Additionally, Any source value, with a mapping applied to the property, will be mapped to the target filesystem appending the target filesystem to the beginning of the value. For example, a source value containing no forward slash("/") example_value, equates to a target value of <target_filesystem>/example_value.

Only adjust or uncomment these properties when directly instructed by Support.

Name	Details
hivemigrator.locationmapping.keys.serde	Map SerDe table location properties values supplied to this property to the target location during migration. Default value: none
hivemigrator.locationmapping.keys.tableproperties	Map table location properties supplied to this property to the target location during migration. Default value: none

Iceberg agent historical metadata retention

The following properties allow the adjustment of Iceberg agent behaviour.

Name	Details
iceberg.write.metadata.previous-versions-max	Limits the number of previous metadata versions to retain on Iceberg agents. Default value: 200

caution

Don't adjust this value unless explicitly directed. See the current recommended value for historical metadata retention.

Hive Migrator logging

You can find configuration for the Hive Migrator log in /etc/wandisco/hivemigrator/log4j2.yaml.

Hive Migrator debug logging

Below shows the steps to enable debug level logging for the application and additional logging for the Java virtual machine (JVM).

Enable application debug logging

Use the following steps to enable debug level logging for Hive Migrator:

1. Open /etc/wandisco/hivemigrator/log4j2.yaml
2. Edit the log.level property value from info to debug.

Example

- name: log.level
   value: "debug"

3. Save the changes.
4. Restart the Hive Migrator service. See System service commands - Hive Migrator

info

After you've completed your investigation, reverse the changes. The debug mode generates massive log files that may exhaust your available storage.

Enable Java connection debug logging

Use the following steps to investigate authentication/authorization problems when using a HDFS source or target:

1. Open /etc/wandisco/hivemigrator/vars.sh.
2. Add the following JVM argument:

   HVM_EXTRA_JVM_ARGS="-Dsun.security.krb5.debug=true -Dsun.security.jgss.debug=true -Dsun.security.spnego.debug=true"
3. Add the following log location parameter:

   LOG_OUT_FILE=/var/log/wandisco/hivemigrator/hivemigrator.out
4. Save the changes.
5. Restart the Hive Migrator service. See System service commands - Hive Migrator

info

After you've completed your investigation, reverse the changes. The debug mode generates massive log files that may exhaust your available storage.

Learn more about adding additional JVM arguments in the knowledge base.

Change Hive Migrator log and heap dump location

The default path for Hive Migrator logs is /var/log/wandisco/hivemigrator. You can change the default path by editing the /etc/wandisco/hivemigrator/log4j2.yaml file. Before making changes, ensure the path exists and is writable by Hive Migrator.

1. Open /etc/wandisco/hivemigrator/log4j2.yaml
2. Edit the log.dir property value with your new path.

Example

- name: log.dir
   value: "/var/log/newlocation/hivemigrator"

3. Save the changes.
4. Restart the Hive Migrator service. See System service commands - Hive Migrator

info

Changes to the default log location won't persist after upgrade. After upgrading to a new version, you will have to reapply these changes.

Directory structure

The following directories are used for Hive Migrator:

Location	Content
/var/log/wandisco/hivemigrator	Logs
/etc/wandisco/hivemigrator	Configuration files
/opt/wandisco/hivemigrator	Java archive files
/var/run/hivemigrator	Runtime files

Remote servers

The following directories are used for Hive Migrator remote servers (remote agents):

Location	Content
/var/log/wandisco/hivemigrator-remote-server	Logs
/etc/wandisco/hivemigrator-remote-server	Configuration files
/opt/wandisco/hivemigrator-remote-server	Java archive files
/var/run/hivemigrator-remote-server	Runtime files